No PCI Express NICs in PCI Express Graphics Slots?

I own a Shuttle SB81P that has a 32 bit 33 Mhz PCI slot, and a 16x PCI Express slot. Earlier I asked if anyone was using the Intel PRO/1000 PT Dual Port Server Adapter, since I wanted to use that NIC in the PCI Express slot.

It turns out that I cannot use that NIC in my Shuttle. I got a sense that it might not work when I noticed the Shuttle documentation called the 16x slot a "PCI Express Graphics (PEG)" slot.

I inserted the 4x NIC into the 16x slot, but I could never get the Shuttle to recognize it. I even followed helpful advice from this VMware thread pointing me to Intel's ibautil.exe, which is a DOS utility that probes for Intel cards (among other tasks). It didn't see the PCI Express NIC.

I eventually took the NIC to my friend Hank at NetWitness, and we put the NIC into the PCI Express slot of a Dell 850 server. I booted the server with a FreeBSD 6.1 install CD, and then started a shell. Sure enough, FreeBSD detected em0 and em1 -- two new Intel Pro NICs.

This is probably a stretch, but is anyone using PCI Express NICs in Shuttles? I'm considering buying a new Shuttle, if I can find one that has at least one PCI Express slot that accepts PCI Express NICs. It seems Shuttles like the SB95P V2 have 16x slots (probably for PEG/video) and 1x, which doesn't help me with the 4x Intel Pro NIC.

Alternatively, is anyone using PCI Express NICs in any PCI Express slots that are presumably for graphics cards?

Comments

Anonymous said…
The PCI Express slot in your shuttle and many other boards are dedicated (hardwired) to the graphics bus of your chipset. Motherboard manufacturers are adding one 16x and a few 4x slots to motherboards these days. The 16x are almost exclusively reserved for the graphics bus.

So, you will need to find a board that has an additional pci express slot, such as a 4x or higher. Note that a 4x card can run in an 8x or 16x also, but not a 16x on the graphics bus.
8:28 PM
Richard Bejtlich said…
higB, right on. I have one of those too. Not bad in an emergency. When you are going to update your blog?

Joe, thanks for the definitive answer. I bet I will not find a Shuttle that has two general-purpose PCI Express slots.
8:35 PM
Anonymous said…
yeah higB, when'r you gonna update your blog? It's been ages. I miss you guys. :)
9:07 PM
Joe said…
Richard,

I could not find any desktop boards with 4x slots. I did notice that Tyan and other server boards have 4x slots though.
4:57 PM
Richard Bejtlich said…
Joe, you just made me check if Intel has a 1x PCI Express NIC. It does, the Intel® PRO/1000 PT Desktop Adapter. They don't see a dual port version for a 1x slot apparently.
7:59 PM
Anonymous said…
I've used the Intel Pro-1000x4 PCI-express16 in a shuttle p2/27. All the ports get recognized. This is running Solaris 10x86/64 bit.

Also an Qlogic QLE4060 ISCSI card.
4:02 AM
pci compliance said…
Great post!
9:02 PM
Post a Comment

Popular posts from this blog

Zeek in Action Videos

Image
This is a quick note to point blog readers to my Zeek in Action YouTube video series for the Zeek network security monitoring project .  Each video addresses a topic that I think might be of interest to people trying to understand their network using Zeek and adjacent tools and approaches, like Suricata, Wireshark, and so on.  I am especially pleased with Video 6 on monitoring wireless networks . It took me several weeks to research material for this video. I had to buy new hardware and experiment with a Linux distro that I had not used before -- Parrot .  Please like and subscribe, and let me know if there is a topic you think might make a good video.
Read more

MITRE ATT&CK Tactics Are Not Tactics

Image
Just what are "tactics"? Introduction MITRE ATT&CK  is a great resource, but something about it has bothered me since I first heard about it several years ago. It's a minor point, but I wanted to document it in case it confuses anyone else. The MITRE ATT&CK Design and Philosophy document from March 2020 says the following: At a high-level, ATT&CK is a behavioral model that consists of the following core components: • Tactics, denoting short-term, tactical adversary goals during an attack; • Techniques, describing the means by which adversaries achieve tactical goals; • Sub-techniques, describing more specific means by which adversaries achieve tactical goals at a lower level than techniques; and • Documented adversary usage of techniques, their procedures, and other metadata. My concern is with MITRE's definition of "tactics" as "short-term, tactical adversary goals during an attack," which is oddly recursive. The key word in the tacti...
Read more

New Book! The Best of TaoSecurity Blog, Volume 4

Image
  I've completed the TaoSecurity Blog book series . The new book is  The Best of TaoSecurity Blog, Volume 4: Beyond the Blog with Articles, Testimony, and Scholarship .  It's available now for Kindle , and I'm working on the print edition.  I'm running a 50% off promo on Volumes 1-3 on Kindle through midnight 20 April. Take advantage before the prices go back up. I described the new title thus: Go beyond TaoSecurity Blog with this new volume from author Richard Bejtlich. In the first three volumes of the series, Mr. Bejtlich selected and republished the very best entries from 18 years of writing and over 18 million blog views, along with commentaries and additional material.  In this title, Mr. Bejtlich collects material that has not been published elsewhere, including articles that are no longer available or are stored in assorted digital or physical archives. Volume 4 offers early white papers that Mr. Bejtlich wrote as a network defender, either for technica...
Read more